Made from Chrysotile Asbestos
Fiber , Natural Rubber & Butadiene Rubber
Applications:
To seal off steam, air, water,
Natural gas, saline solutions, Alkalies, Amonia &
also suitable for oils & fuels & serval other
Non-Aggressive media under medium stress conditions.
The following Information Applies to
material Thickness 1.5mm.
1500MM X3100MM, 1500MM X1500MM, 1500MM X 1000MM, 1500MM
X 2000MM, 1270MM X1270MM, 1270MM X 3810MM, 3000MM X 3000MM
SURFACE FINISH
:
Red, Grey , Graphited (OTHER COLORS ON REQUEST)
OPERATING CONDITION
:
Maximum pressure : 80 Bar
Maximum Temperature: 450°C
SPECIFICATION COMPLIANCE
:
IS: 2712 / 1998 GRADE W / 2
The following Information Applies to
material Thickness 1.5mm.
S.NO.
Typical Properties
Test Method
Unit
Specified Value
1
DENSITY
IS:2712/1998
G/cm3
1.70 - 2.20
2
TENSILE STRENGTH
IS:2712/1998
Mpa
>12.8
3
COMPRESSIBILITY
IS:2712/1998
%
6 -14
4
RECOVERY
IS:2712/1998
%
>40
5
IGNITION LOSS
IS:2712/1998
%
<28
6
STRESS RESISTANCE
IS:6210/1979
Mpa
>17.5
7
WATER-ABSORPTION
(a) Mass Increase
IS:2712/1998
%
<10
NOTE
All information and recommendations given
in this brochure are correct to the best of our knowledge.
However, in view of the wide varsity of possible installation
and operating conditions one cannot draw the final conclusion in
all application cases regarding the behaviour in a gasket joint.
Therefore, information can only serve as a guideline.
